Case Study: Precoat filtration system performance for Honing oil

Case Study: Precoat Filtration Performance For Honing Oil

Product Installed: Pressure Precoat Filter DFP-5A

Industry: Automotive

Process Type: Honing – Cylinder Bore Machine

 

Client

Our client is a widely-known multinational automotive manufacturing corporation and is one of the largest vehicle manufacturers by production based in India.

 

The Challenge

Our client performs cylinder bore component honing as part of their overall manufacturing process. The filtration system installed initially was not able to filter out the fine honing dust from the oil. The filtered oil containing fine honing dust was being circulated and started damaging the honing machine, subsequently leading to inaccurate honing performance and affecting tool life.

 

Solution

SE Coopermatics took up the challenge to develop an effective filtration system that could separate the minutest particles from their honing oil. We supplied a dual-filter Pressure Precoat Filtration System (DFP-5A) on trial for a 3 month observation period with multiple tests conducted to measure the quality of filtered oil. The precoat system was able to perform well and deliver good results within just 2 weeks of test runs.

 

 

 

As seen in the graph, the SE Coopermatics precoat filtration system was able to outperform the previous filter. The following were the results of oil quality with our filter:

  • Drastic improvement in oil quality.
  • Millipore values came down from 39 to 8 (see graph).
  • Reduction in oil contamination/particles.
  • The pot was completely dry.

 

With a SE Coopermatics precoat filtration system, the customer will be able to expect the following benefits:

  • Reduce surface finish variation and bore to bore variation.
  • Reduce the frequency of cleaning tanks from 6 months to 3 years with estimated costs of just 1.9 Lakhs per year. 
  • Eliminate the possibility of ledges getting stuck due to excessive mud in honing tool.
  • Decrease the frequency of tool cleaning activity from once a day to once a week.
  • Achieve basic hygiene for machine parts and enhance overall machine life.

 

Get in touch with our team of experts to learn more about our products that can add value to your production process.

 
 

Share:

Facebook
Twitter
LinkedIn
Pinterest
Get The Latest Updates

Subscribe To Our Weekly Newsletter

No spam, notifications only about new products, updates.

Related Posts